MegaBlock Machine Plaster Mortar
Megablock Plaster mortar, which is a cement-based ready-to-use rough plaster that can be applied by hand, can be used on ceilings and surfaces indoors and outdoors.
- The container in which the mortar will be prepared must be clean and clear of the remnants of the previous mixture.
- Attention should be paid to the cleanliness of the water and materials used.
- The mortar should be prepared at the rate of 35 kg Megablock Machine Plaster Mortar in 8.5-9 liters of water.
- Aluminum anos are placed on the surface to determine the thickness of the plaster before the application.
- The surface to be applied must be wetted just before the application. Megablock Machine Plaster Mortar should be sprayed on the application sur- face in horizontal stripes, leaving no gaps on the application surface at the same density.
- The application thickness should be at least 8 mm and a maximum of 10 mm on the ceiling for one layer and 10-20mm on other facades. If the second layer is required, it should be applied without taking the first-floor socket. It should not be applied more than one layer on ceiling sur- faces and two layers on other surfaces. After 5-10 minutes, gauging is done.
- When the plaster does not move when touched with a finger, it is correct- ed with a trowel.
- Approximately 30 minutes after the correction process, the surface is slightly wetted, sponge trifoliate is made and the process is finished.
- In terms of the strength of the plaster, the surfaces should be watered within 7 days after the application, depending on the ambient conditions.
- The prepared mortar must be consumed within 2 hours.
- Hands and application tools should be washed with plenty of water after application.
- Approximately 10-12 kg / m2 (for 10 mm thickness)
| Dry Bulk Density: | 1500± 300kg/m3 |
|---|---|
| Thermal Conductivity: | Çizelge 2 T1 ≤ 0,57 W/mK (P=%90) |
| Compressive Strength: | CS IV ( ≥ 6 N/mm²) |
| Bond Strength: | 0,3 N/mm² FP: A |
| Bond Strength: | W0 (≤ 0,5 kg/m2.dk0·5) |
| Water Vapor Permeability Coefficient: | ≤30μ |
| Fire Class: | A1 |
| Temperature Resistance: | -30°C ile + 60°C arası |