EPS - Grey Insulation Boards

16 Dens 20 Dens

Mega Insulation Solutions EPS boards are closed porous thermal insulation boards inblack - gray white color. It is kept until it has dimensional stability in closed environment. It has high compressive strength andinsulation.

Polystyrene raw material occurs as a result of contact with water vapor, as the pentane gas contained in the raw material granules swells and adheres the granules.

Usage Areas

  • In the thermal insulation (contact facade) of the outer walls,
  • Under the application of the (Siding),
  • In the thermal insulation of the inclined and terrace roofs and in the terrace gardens of the buildings.
  • In the thermal insulation of the floors in the buildings,
  • In the thermal insulation of the overhangs in the buildings,
  • In the thermal insulation of the ceilings in the buildings,
  • In the sound insulation of the floating floors in the buildings
  • It is usedin thermal insulation of cold storage tanks,
  • In dilatation joints,
  • In hollow construction,
  • In order to increase ground strength by filling in loose floors,
  • It is used for duct, tank, warehouse insulation and buildings for other porposes.

Stock and Storage Conditions

  • If possible, the materials should be stacked in a closed environment on low slope, protected from water, on flush wooden blocks. Pallets should not be stacked.
  • If stacked in open environment, nylon or tarpaulin should be covered so as not to interrupt the air flow and create a pool to protect it from water. Sheets should be protected from the sun as well as protected from water.
  • Materials are in packages; a crane should be used if possible at the construction site or on the roof. As the pallet sizes and sizes vary, the appropriate forklift or crane should be selected.
  • If pallets are to be transported by crane, steel or chain ropes should never be used, and flat ropes (nylon, hemp, silk) should be preferred. Wooden wedges should be placed where the ropes come from and their edges should be protected. Wedges should overflow 3.5 cm from the pallets. If a forklift is to be used; If the pallet length is over 6 m, a wide fork lift truck should be used.